The PUcaucho®Systems, the new line for footwear produced by Poliresinas San Luis, allow the manufacture of soles and bases with properties and characteristics similar to rubber. .

In addition to maintaining the main advantages, characteristics and properties of rubber, PUcaucho® also allows the production of soles weighing up to 40% less than those produced with Vulcanized Rubber and Thermoplastic Rubber.

ventaja

40% lighter

ventaja

Abrasion resistant

ventaja

Anti-slip

ventaja

Zero investment for PU manufacturers

ventaja

High productivity

Unmatched advantages

  • The same feel as rubber.
  • Excellent abrasion resistance, similar to vulcanized rubber.
  • Easier and faster production than vulcanized and synthetic rubber.
  • 40% lighter than typical rubber.
  • Product rated as anti-slip.
  • Does not require investment in production and equipment for producers of polyurethane shoe soles.
Properties PUcaucho® Vulcanized Rubber Thermoplastic Rubber
Density (g/cm3) 0,70 - 1,10 1,10 - 1,30 0,95 - 1,00
Hardness (Shore A) 48 - 70 65 - 70 60 - 65
Tensile strength (N/mm2) 5 - 11 10 - 12  5 - 7
Tear resistance (N/mm2) 5 - 12 10 - 13 8 - 10
Abrasion (mg) 30 - 200 150 - 200 200 - 250
Demoulding time (seg) 30 - 240 480 - 600 240 - 400
Resistencia a la flexión (Kciclos) > 30 > 30 > 30
PUcaucho®
Density (g/cm3) 0,70 - 1,10
Hardness (Shore A) 48 - 70
Tensile strength (N/mm2) 5 - 11
Tear resistance (N/mm2) 5 - 12
Abrasion (mg) 30 - 200
Demoulding time (seg) 30 - 240
Resistencia a la flexión (Kciclos) > 30
Vulcanized Rubber
Density (g/cm3) 1,10 - 1,30
Hardness (Shore A) 65 - 70
Tensile strength (N/mm2) 10 - 12 
Tear resistance (N/mm2) 10 - 13
Abrasion (mg) 150 - 200
Demoulding time (seg) 480 - 600
Resistencia a la flexión (Kciclos) > 30
Thermoplastic Rubber
Density (g/cm3) 0,95 - 1,00
Hardness (Shore A) 60 - 65
Tensile strength (N/mm2) 5 - 7
Tear resistance (N/mm2) 8 - 10
Abrasion (mg) 200 - 250
Demoulding time (seg) 240 - 400
Flexion resistance (Kciclos) > 30